Presstek 3404di laser imaging error E-025

Discussion in 'DI Presses' started by Blacktail, Aug 18, 2022.

  1. Blacktail

    Blacktail Member

    Joined:
    Apr 2022
    Messages:
    10
    Location:
    west coast canada
    I was recently running density tests for a smoother plate images, and had to replace one of the 3 lasers on tower 1. All went well, got it dialed in with density tests and was great. But after imaging a third time with new laser I lost all image on zone 2. The next time I tried imaging it got up to speed then shut down with E-025 error. The GUI error code is 268460109. NSA error code is 1000604D laser shunt relay open error.

    Anyone know what these codes mean? I tried a different laser, same thing. Is the board shot? Anything else I can try before replacing the board?
     
  2. TripperTony

    TripperTony New Member

    Joined:
    Jun 2022
    Messages:
    3
    Location:
    Mexico
    E-025 talks about communication between CPU console and laser heads.
    Check board drivers.
    Try with another Firewire cable.
    Let me know if something different happens, please.

    The reason for my E-025 is about software
     
Loading...