polar emc 115 hydraulic problem engine serial number 4936123

Discussion in 'Cutters and Trimmers' started by Fernanda hamdalah armianto, Aug 23, 2024.

  1. Fernanda hamdalah armianto

    Fernanda hamdalah armianto New Member

    Joined:
    Mar 2024
    Messages:
    1
    Location:
    Indonesia
    I have a problem with the hydraulics, the clamps and cutters don't work. The efforts I have made are replacing the ring seal, changing the oil, removing air from the clamp and clutch. The solenoid has a voltage of +42vdc, but the problem has not been resolved.
     
  2. ESPofKC.com

    ESPofKC.com Member

    Joined:
    May 2014
    Messages:
    18
    Location:
    USA
    Does the safety bolt activate?
     
Loading...