Polar Bander for labels - separator troubles

Discussion in 'Cutters and Trimmers' started by oabrahim, Dec 3, 2020.

  1. oabrahim

    oabrahim Member

    Joined:
    Apr 2016
    Messages:
    43
    Location:
    Venezuela
    Hello, in this case the inverter Lenze was changed due a failure. The new one needs to be adapted to this machine section via parameters. But the client do not have the list of parameters specific for this. the main parameters needed are C010, C011, C013, C014, C037 and C038. In the (schaltplan) wiring diagram the related Lenze is identificated like 3T2 to control the separator motor 3M1. The equipment was working with little jerks but now it shows a error message in display: HOME POSITION OF SEPARATOR MISSING. The machine stops.
     
Loading...