Polar 92. Error Code 133

Discussion in 'Cutters and Trimmers' started by retsam, May 30, 2019.

  1. retsam

    retsam New Member

    Joined:
    May 2019
    Messages:
    3
    Location:
    Russia
    good afternoon.. recently, the device began to give this error. he noted that it gives when cutting bundles to a height of about 1cm (if cutting dry or thick sheaf is not a problem).
    there is no documentation. emitters and receivers were cleaned, it did not help..

    sorry for English
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,500
    Location:
    Managua,Nicaragua
    Hi :
    This is error coming when the Light barrier is interrupted.
    Solution:
    Check operating status display of light barrier. If LEDs D1 and D2 of LS are
    flashing there was an internal LS malfunction
    - Replace LS board
    broken cable/wire from cut buttons S28a / S28b : please test it.
    Let me know,
    What model Polar 92 do you have? ED .XT?
    Blessing
    superchock@yandex.com
    Mobile+WhatsApp:+505 8861 1441
     
Loading...