Polar 76 em startup problems

Discussion in 'Cutters and Trimmers' started by Vlad Gorcia, Apr 23, 2023.

  1. Vlad Gorcia

    Vlad Gorcia Member

    Joined:
    Apr 2023
    Messages:
    7
    Location:
    Bacau, Romania
    Hello to all members!
    I have a Polar 76 EM who dont achive initial quota.
    The backgauge goes to the end of the table and there it remains. (Display 0)
    Can someone help me with some advice?
     
  2. PWInc

    PWInc Member

    Joined:
    Sep 2020
    Messages:
    56
    Location:
    Canada
    It means it can't find the reference position. Problem can be LMS cable or the Scanning head.
     
  3. Vlad Gorcia

    Vlad Gorcia Member

    Joined:
    Apr 2023
    Messages:
    7
    Location:
    Bacau, Romania
    Thank you, I will check
    Vlad
     

  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir;

    Please review very well, clean, tight, and look for oxide in the connecto of LMS, very carefully+ and rear final limit switch, for loose wires, dirty, defective, or disajustment.!
     
Loading...