Polar 76 clamp does not move

Discussion in 'Cutters and Trimmers' started by STEFAN OLTEAN, Sep 30, 2021.

  1. STEFAN OLTEAN

    STEFAN OLTEAN New Member

    Joined:
    Sep 2021
    Messages:
    2
    Location:
    Romania
    I have a Polar 76EM guillotine
    I had an error 84.
    the Y315 valve coil was defective and was rebuilt.
    now on the coil connector I have 56Vdc (6.8-6.9)
    The problem is that it does not lower the clamp, neither at the cutting command, nor at the pedal control.
    no error occurs.
     
  2. oabrahim

    oabrahim Member

    Joined:
    Apr 2016
    Messages:
    43
    Location:
    Venezuela
    Hello
    Only a question... the belts are ok?
     
  3. STEFAN OLTEAN

    STEFAN OLTEAN New Member

    Joined:
    Sep 2021
    Messages:
    2
    Location:
    Romania
    Yes,
    When the pedal is operated, the sound of the hydraulic unit changes
     
Loading...