Polar 55EM repair

Discussion in 'Cutters and Trimmers' started by Art_I_shock, Jul 8, 2015.

  1. Art_I_shock

    Art_I_shock Member

    Joined:
    Jul 2015
    Messages:
    13
    Location:
    Russia
    Hi! Could anyone help with technical manual and spare parts catalog for Polar 55EM
     
  2. Coloured paper

    Coloured paper Senior Member

    Joined:
    Oct 2012
    Messages:
    258
    Location:
    Germany
    Здравствуйте

    A manual for 55EM is not a good available. The company Polar never made such manual. There old training information’s. But there for you need a training course. This training courses where hold 1985 up to 1988. In other words you need a time machine as well.
    And because this is much too complicated, you should tell us the machine number and the problem you have. К сожалению, день рождения только раз в году. But at least one time.

    Все Хорошо

    Красочные бумаги
     
  3. Art_I_shock

    Art_I_shock Member

    Joined:
    Jul 2015
    Messages:
    13
    Location:
    Russia
    Супер!
    How can I get serial number? Plate with number from backside is missing
    We have broken plastic gear, we repaired it but I want to replace it.

    Our cutter doesnt have light beams is it possible to replace it the with some modern gadgets? For example security IR sensor
     
  4. Coloured paper

    Coloured paper Senior Member

    Joined:
    Oct 2012
    Messages:
    258
    Location:
    Germany
    Hi Art and shock!?!

    Usually the machine comes with some documentation.
    Spare part book is missing
    Operating manual is missing
    Electrical drawings are missing
    Kill the second hand dealer !!!!!!!!!!!!!!!! Maybe you find a label inside the electrical cabinet. The people in the assembly used a marker and wrote a number from the bottom of the table. Maybe you can find something.

    The light barrier was for this little machine was an option. 30 years ago the safety philosophy was different.

    Is the broken plastic gear from the hand fine adjustment to the spindle?
    Which function does not work?

    Coloured paper
     
  5. Art_I_shock

    Art_I_shock Member

    Joined:
    Jul 2015
    Messages:
    13
    Location:
    Russia
    I've Operating manual.

    Spare part book is missing
    Electrical drawings are missing
    Is it possible to find them in electronic form?

    Plastic gear is used to move backguage by belt from electromotor or by hand
     
  6. Coloured paper

    Coloured paper Senior Member

    Joined:
    Oct 2012
    Messages:
    258
    Location:
    Germany
    On the rear side (last page) of the operating manual is a number. It is at the lower right corner. I think it is one of this numbers:
    11035 5551001
    02035 5651001
    03035 5751001
    Which number is correct?

    Did you find the label number inside the electrical cabinet?
    The number should be between 5551001 and 5851500.
    And I need an Email address for the electrical drawing and the spare part book

    Coloured paper
     
  7. Art_I_shock

    Art_I_shock Member

    Joined:
    Jul 2015
    Messages:
    13
    Location:
    Russia
    Operating manual is in Russian, so there is no any number it.
    in Electrical cabinet I've found only label with GrundMass label. On it is handwritten "-19250"

    I can find serial numbers on hydraulic pump and Polartech device.

    моя почта rh1111(собака)mail(точка)ru
     
    Last edited: Jul 10, 2015
  8. Art_I_shock

    Art_I_shock Member

    Joined:
    Jul 2015
    Messages:
    13
    Location:
    Russia
    Did it to work.
    I've got another problem. Is there in this cutter calibration? After cutting size of cutted paper with size 50мм is bigger for about 0,6мм.
     
  9. Coloured paper

    Coloured paper Senior Member

    Joined:
    Oct 2012
    Messages:
    258
    Location:
    Germany
    On the computer board (CP55) behind the keyboard are switches. Before you change the switches write the actual number done. If the size is out of range, the machine will not work at all.

    There are four little switches (left / right) in one housing (S7). These switches are to change functions (cm, mm, sun) they should stay in the way they were.

    The other 4 rotary switches (0 to 9) are for the size adjustment. If I remember correct there are beside these switches numbers (10, 1, 0.1 and 0.01).

    The switch 10 = 10 mm per step
    The switch 1 = 1 mm per step
    The switch 0.1 = 0.1 mm per step
    The switch 0,01 = 0.01 mm per step
    To have to take care in case you go over zero. Let's say the switch is in the position "8" and you need to add 5 steps. If you switch to "3" you have 5 less. In this case you have to change the next decade (one more) as well.

    Good luck

    Coloured paper
     
  10. Art_I_shock

    Art_I_shock Member

    Joined:
    Jul 2015
    Messages:
    13
    Location:
    Russia
    Coloured paper, thank you
    Will try to play with switches.

    Could you send me the electrical drawing and the spare part book?
    Didn't recieve any email.
    Thank you
     
  11. Coloured paper

    Coloured paper Senior Member

    Joined:
    Oct 2012
    Messages:
    258
    Location:
    Germany
    Okay I try again
     
  12. Art_I_shock

    Art_I_shock Member

    Joined:
    Jul 2015
    Messages:
    13
    Location:
    Russia
    Hello!
    Again my cutter down.
    It shows after turning on ---29 on a small display. Could anyone give me error codes for my cutter?
     
  13. Coloured paper

    Coloured paper Senior Member

    Joined:
    Oct 2012
    Messages:
    258
    Location:
    Germany
    Error 29 in a 55 EM means:
    A key of the keyboard is jammed or defective.
     
  14. Art_I_shock

    Art_I_shock Member

    Joined:
    Jul 2015
    Messages:
    13
    Location:
    Russia
    Coloured paper

    Thank you. Have corrected it.

    Do you know what type of grease is best for it?
    and what type of oil is used in hydropump?
    Could you recommend supplier for spare parts?

    Is any possibilities to find a serial number of my cutter?
     
  15. Coloured paper

    Coloured paper Senior Member

    Joined:
    Oct 2012
    Messages:
    258
    Location:
    Germany
    In the operating manual (which you should have by now) you find on page 35 an instruction regarding service and lubrication.
    On the left side you have the list of recommended grease and on the right side you have the list of recommended hydraulic oil.
     
  16. Art_I_shock

    Art_I_shock Member

    Joined:
    Jul 2015
    Messages:
    13
    Location:
    Russia
    ok. thank you!
     
  17. Richard 777

    Richard 777 Member

    Joined:
    Nov 2013
    Messages:
    34
    Location:
    Ottawa
    I am having a problem with a polar 55em
     
  18. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Good day sir:
    Hi hope you are well
    What happen with his paper cutter Polar 55EM?
     
  19. Richard 777

    Richard 777 Member

    Joined:
    Nov 2013
    Messages:
    34
    Location:
    Ottawa
    Hi Chock,

    Intermittently the cutter has no power and will stall in the paper.

    Richard
     

  20. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir
    Can you send more details_
    Because If you say has NOT power, there are Not Input to the machine
    and if stall in the paper. That issue is NOT mean what you say.
    Maybe you can explain me more carefully.
    However you must identify if the power input for the machien if 220-240Vac ?
    or 380-440Vac, in any case you must have tolerance in +- 10% above or below
    Measure with DMM(digital multimeter)
    Must have Schematic Diagrams, for to follow where is missing the Voltage, or cut the Power supply
    electronic misising some digital voltages+5Vdsc, 24Vdc etc ??
    Or the Knife need to regrind or new one.
    or bad adjustment(mechanically and electrical) both posibility.
    In short explain me, carefully
     
Loading...