Bayang Ismael
Member
- Joined
- 2024
- Posts
- 7
- Geo
- Cameroun
Hello,
We have a polar 13ED cutting machine stuck on the error BRK-ERR 16 which sometimes changes to BRK-ERR 2. I actually tried to erase the error by pushing the 'C' key but I got no change, I also removed the CP board since I saw in the error manual that the problem was related to that board, but visually i couldn't see anything fishy. So actually my concern to know what I can do on that board since I'm an electronic technician in order to clear that error.
You can find the picture of the error as an attached file.
Thank you.
We have a polar 13ED cutting machine stuck on the error BRK-ERR 16 which sometimes changes to BRK-ERR 2. I actually tried to erase the error by pushing the 'C' key but I got no change, I also removed the CP board since I saw in the error manual that the problem was related to that board, but visually i couldn't see anything fishy. So actually my concern to know what I can do on that board since I'm an electronic technician in order to clear that error.
You can find the picture of the error as an attached file.
Thank you.
