Polar 137 won't cycle at all
- Thread starter dbowers
- Start date
Coloured paper
Senior Member
Do not cut anymore!
First take a look if the shear bolt inside the connecting rod (connecting paese from the gear box to the knife carrier) is broken.
If the shear bolt is broken you can replace it. Usualy there is one in the tool box.
There are instrutions in the operating manual for this.
Good luck
Coloured paper
First take a look if the shear bolt inside the connecting rod (connecting paese from the gear box to the knife carrier) is broken.
If the shear bolt is broken you can replace it. Usualy there is one in the tool box.
There are instrutions in the operating manual for this.
Good luck
Coloured paper
Advertisement:
Forum posts represent the experience, opinion, and view of individual users. The Color Printing Forum does not necessarily endorse nor share the view of each individual post.
When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.
