Polar 115X Oil Filter Change Error

Discussion in 'Cutters and Trimmers' started by Melvin Bautista, Apr 19, 2023.

  1. Melvin Bautista

    Melvin Bautista Member

    Joined:
    Jan 2021
    Messages:
    7
    Location:
    Guatemala
    Good morning, could someone help me with this error: the oil has already been changed and the oil filter has also been changed and the error does not go away. I appreciate your support.
     

    Attached Files:

  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hello ;

    I hope all is well.

    If you did not bleed the complete hydraulic system, the system will give an error like the one you are presenting.

    Please proceed to do so.
     
  3. Melvin Bautista

    Melvin Bautista Member

    Joined:
    Jan 2021
    Messages:
    7
    Location:
    Guatemala
    Thank you for your answer, the error was there before the change and the entire system has already been purged.
     
  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Thank you, you worked at Triton in Guatemala?
     
  5. Melvin Bautista

    Melvin Bautista Member

    Joined:
    Jan 2021
    Messages:
    7
    Location:
    Guatemala
    I didn't have the pleasure of working there. Do you have any other idea what could be my problem?
     

  6. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    The sensor filter should see if it is ok, loose wire, bent pin or bad contact.
    Or if the sensor is faulty.
     
Loading...