Polar 115 emc

Discussion in 'Cutters and Trimmers' started by Nico Dames, Apr 16, 2019.

  1. Nico Dames

    Nico Dames New Member

    Joined:
    Mar 2019
    Messages:
    3
    Location:
    South Africa
    Good day members. Please assist. My polar 115emc starts up normal. A zero comes up on the display then changes to err 88. Checked safety bolt limit an voltages. Need some expert advise please.
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,344
    Location:
    Managua,Nicaragua
    Hi sir:
    Please do the next:
    1) Measure Aprox +42Vdc plug: CU 9.2+CU9.3
    2) Check for mechanical Stiffness in its movement.,use Graphite for Lube very well.
    3) test the Monitors Sensors S.SB , and see in your schematic diagrams for +24Vdc Plug: CU 9.6 +CU 9.4
    Blessing.
    superchock@yandex.com
    Mobile+WhatsApp:+505 8861 1441
     
  3. Nico Dames

    Nico Dames New Member

    Joined:
    Mar 2019
    Messages:
    3
    Location:
    South Africa
    Thank you very much sir. Will do that in the morning.
     

  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,344
    Location:
    Managua,Nicaragua
Loading...