Polar 115 EM-Mon Break Magnet notwork

Hi everybody.
magnetic solenoid Y17 cutting machine does not work. the power I measured was 22vdc. it should be 24vdc.
I've checked the PS card
24.2 vdc
12 vdc
5.1 vdc
I hope someone can provide a solution

 

Hi sir:
The problem, can be the Coilor winding from Magnet is reheating, NOR burning, and possible mechanical damage.

Repair or Replace it, 22Vdc is NOT big issue, that voltage is because the winding inside is defective(reheating).