PM74 Blanket Washers

Discussion in 'Heidelberg Printing Presses' started by Randeye, Jul 9, 2013.

  1. Randeye

    Randeye Member

    Joined:
    Jul 2013
    Messages:
    6
    Location:
    West Palm beach, Florida
    Does anyone know how to program these blanket washers? When they go on they start in the middle of the cylinder instead of the beginning leaving a trail of blanket wash.
     
  2. mrheidelberg

    mrheidelberg Senior Member

    Joined:
    Jan 2008
    Messages:
    761
    Location:
    United Kingdom
    So you are saying the blanket washers go on every unit at the half way point at the same time even though the blanket cylinders when rotating are in different positions.
     
  3. Randeye

    Randeye Member

    Joined:
    Jul 2013
    Messages:
    6
    Location:
    West Palm beach, Florida
    That is correct, they lift off the cylinder as though it was the gap in the cylinder only its the center of the blanket.
     
Loading...