Piller ir dryer service manual

Discussion in 'Heidelberg Printing Presses' started by therain16, May 14, 2018.

  1. therain16

    therain16 Member

    Joined:
    May 2018
    Messages:
    6
    Location:
    France
    Dear all,
    I'm looking for service manual for a PILLER IR Drayer:
    VERSION: SM102/CD102
    Standard delivery, ink
    Software Version: V0.63
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,176
    Location:
    Managua,Nicaragua
    Hi sir :
    Hope you are well.
    What is his the problem with his machine?
    Let me know, or send me email.perhap i can help you
    Blessing
    superchock@yandex.com
    celular+WhatsApp:+50588611441
     
  3. therain16

    therain16 Member

    Joined:
    May 2018
    Messages:
    6
    Location:
    France
    Hi Chock,
    Every thing seems to be ok (no error on the comcon), green led on, but the dryer wont start when the press is printing?
    note: the dryer never worked before, no one tried to use it until last week.
     
  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,176
    Location:
    Managua,Nicaragua
    Hi Sir:
    Let me try to help you, use his schematic diagram SM/CD/102
    1) Measure the input Q12 -3 phases switch for Voltages 220 or 380Vac .Tight very well the lines Ground,and Neutral.
    2) If there are input-measure the output of Q12 L1-L2-L3
    3)See if there are input Voltages(L1-L2-L3) in Bridge Rectifier GF1,consequently must be there output Voltages for+10Vdc +24Vdc
    4) If there are o.k the output Voltages DC Reset all this C.Breakers :M-F2 -M-f3-M-f4-M-F5. There are critical for machine function properly..
    5) After you did, and everything is O.k. Test if the Dryer Start with the Press printing.
    Let me know any question
    Blessing
    superchock@yandex.com
    celular+WhatsApp:+50588611441
     
  5. therain16

    therain16 Member

    Joined:
    May 2018
    Messages:
    6
    Location:
    France
    I don't have Q12 in the system but 413vac is present on Q12 Q70 Q71 Q30 Q90 Q100 A30.1 and A30.2
    I have no bridge rectifier but a transformer with a built-in bridge rectifier input 3x414Vdc output 25.79vdc 11.9 vdc and 10.1 vdc

    I reset all the breakers and they seems to be ok
    Still not starting while printing
     
  6. junker1984

    junker1984 Senior Member

    Joined:
    Jan 2010
    Messages:
    598
    Location:
    US, Midwest
    Did it ever get tied in to the STA interface upon installation?
     
  7. therain16

    therain16 Member

    Joined:
    May 2018
    Messages:
    6
    Location:
    France
    Yes, I checked the connections to the press and seems to be ok, I don't have the wiring diagram.
    At least when I press the emergency stop on the press it appears on the dryer.
     
  8. junker1984

    junker1984 Senior Member

    Joined:
    Jan 2010
    Messages:
    598
    Location:
    US, Midwest
    STA
     

    Attached Files:

    Ricardo likes this.
  9. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,176
    Location:
    Managua,Nicaragua
    Hi sir:
    I was saw that you do not have Schematic Diagram.
    send me his email, and will send you the S.D, for better troubleshooting.
    I did identify his schematic diagrams for his machine Piller IR Dryer.
    in that way you can fix it, or can help you to do that.
    Let me know any question
    Blessing
    superchock@yandex.com
    celular+WhatsApp:+50588611441
     
  10. therain16

    therain16 Member

    Joined:
    May 2018
    Messages:
    6
    Location:
    France


    Please send mil to the.rain16@gmail.com
     
  11. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,176
    Location:
    Managua,Nicaragua
    Please see his email now.
    Let me know any question
    Blessing
    superchock@yandex.com
    celular+WhatsApp:+50588611441
     
  12. therain16

    therain16 Member

    Joined:
    May 2018
    Messages:
    6
    Location:
    France
    Thank you so much, the diagram really helped me solving my problem.
    Thanks a gain.
     
  13. junker1984

    junker1984 Senior Member

    Joined:
    Jan 2010
    Messages:
    598
    Location:
    US, Midwest
    Was hoping it would be an easy problem to resolve! Happy to help.
     
    Ricardo likes this.

  14. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,176
    Location:
    Managua,Nicaragua
    ok sir,was a pleased to serve you.
    Let me know if you need more
    assistance.
    Blessing
    superchock@yandex.com
    celular+WhatsApp:+50588611441
     
Loading...

Share This Page