Phaser 7500 printing problems

Discussion in 'Xerox Digital Presses' started by jimmy55, Aug 4, 2015.

  1. jimmy55

    jimmy55 New Member

    Joined:
    Aug 2015
    Messages:
    4
    Location:
    norfolk UK
    Hi I have a Phaser 7500 with 47K pages on the clock and am getting a banding problem. I know the imaging units need replacing soon but would that be the cause of banding that runs the length of the paper ( ie at 90 degrees to the imaging units) or is there another cause? Attached photo I hope shows the problem and direction. Many thanks, jim
     

    Attached Files:

    • test.jpg
      test.jpg
      File size:
      218.9 KB
      Views:
      705
  2. InterfaceP

    InterfaceP Senior Member

    Joined:
    Sep 2013
    Messages:
    189
    Location:
    Dallas, TX
    Looks like drum lines to me.
    Log into Admin pass is 11111
    Then under tools run some test prints C,M,Y,K, 16 grade is what I use. You should be able to see the bad one from there.
     
  3. jimmy55

    jimmy55 New Member

    Joined:
    Aug 2015
    Messages:
    4
    Location:
    norfolk UK
    Thanks for your input I P , I've got a new one on the way so I'll swap them around and see it it improves things.
     
Loading...