Perfecta 76 SC cutter

Hi friends!

Can someone help me to find wiring diagram and/or service manual for a Perfecta
76 SC cutter?!
The machine always give me error 8 and error 15, and i don't know what's wrong with it.
Any hint?

Regards...

 

They both have to do with the light guards. Make sure they are clean and also that there isn't anything in the way when you switch the machine on....like your tie or hands or chest or.......you get the picture.

 

My tie...!!!AhAhAh
Thanks friend, i'll check that when i get to my client...

Regards...

 

Hi friends....
The errors that i had on this machine were related to faulty capacitor on the keyboard pcb.
This capacitor affected, also, the encoder impulses reading...the machine wasn't able to find the reference point...

Best regards

 

Same problem with Perfecta

Dear all;
I have exactly the same problem with Perfecta 76 SC. Error 8 and 15; and encoder is lost. when I want to change position of backholder (ruler) manually it run only for two seconds. We have changed capacitors on motherboard (three are on power side), but the problem resist.

Any idea? Is there other capacitors to change?

Thank you very much; Mitja.

 

Hello ,

Maybe I am too late to reply to this thread.

Contact Perfecta: service@perfecta.de They will give you all the manuals you need. A week ago I requested them for manuals of 115 SC and they gave me the service manuals.

I am so satisfied with thier response !!!

They are special, unique and they are not ignorant and selfish as like most printing machinery manufacturers e.g. STUP1D Man Roland

 

Hello Salos, if is possible you help me please, now
I have the same problem whit this cutting machine, please you tell me how you managed to fix it.
Thank You
Daniele