Pds-e calibration?

Discussion in 'DI Presses' started by Jedo, Mar 28, 2011.

  1. Jedo

    Jedo Member

    Joined:
    Jan 2011
    Messages:
    48
    Location:
    Scotland
    How do u re calibrate the pds e for when u are scanning the colour bar etc... I have the book with the cmyk square in it but not sure on how to exactly calibrate it?
     
  2. ryobiserviceman

    ryobiserviceman Member

    Joined:
    Mar 2011
    Messages:
    27
    Location:
    boston, ma.
    place scanner on white spot hold button until it beeps then place on each color and press button once and it will read and record the numbers
     
  3. Jedo

    Jedo Member

    Joined:
    Jan 2011
    Messages:
    48
    Location:
    Scotland
    Yeah i dont that and it had say 1.63 then when i done that it changed to like - 0.01 or something so didn't think i was doing it correct?
     
  4. Jedo

    Jedo Member

    Joined:
    Jan 2011
    Messages:
    48
    Location:
    Scotland
    I managed to get it done... thanks
     
  5. ryobiserviceman

    ryobiserviceman Member

    Joined:
    Mar 2011
    Messages:
    27
    Location:
    boston, ma.
    lad you were able to solve it
     
  6. Jedo

    Jedo Member

    Joined:
    Jan 2011
    Messages:
    48
    Location:
    Scotland
    Yeah cheers
     

  7. InkSlinger

    InkSlinger Member

    Joined:
    Jul 2009
    Messages:
    16
    Location:
    California
    Thank you, helpful!
     
Loading...