Operators Manual for Acme-Morrison Book Stitcher model N3A- 3/4

[cstahl]

Hello everyone. I work for an offset printing company in Portland Oregon and we purchased some used stitcher equipment and are looking for a manual for one of the older machines.

I'm looking for an Operators Manual for an old Acme-Morrison Book Stitcher model N3A- 3/4.

If anyone could help, it would be truly appreciated.

You can do a search for it on eBay to see what it looks like.

Thank you.

Charlotte
cstahl@signature-graphics.com

 

[cstahl]

Manual Found!

Thank you Devery for sending me the manual we were looking for.

The stitcher is so old we thought we may never find a manual for it, but while he was looking to solve his own stitcher problem he saw my post and helped solve ours.

And thank you Color Printer Forum for having a place where people can help each other.

 

[frankiefleetfoot]

My acme- Morrison stitcher is giving me fits, not unlike every other stitcher I have encountered, but I just started this job and not a single person here can find the manual. It would be very much appreciated if someone could forward me a copy of theirs.......please! frankiefleetfoot@gmail.com


printing's addictive!

 

[rsardine]

I am currently looking for that same manual if anyone could help me out as well, I would greatly appreciate it!
Thanks! E-mail me @ rsardineer@yahoo.com

 

[PrintEdd Rick]

NEEDED: Copy of Operators Manual for Acme-Morrison Book Stitcher model N3A- 3/4

Hi, like others posting here, I am expected to keep an older N3A - 3/4 Stitcher in good working order, and I could REALLY use a scan of the Operator's Manual.

Please help if you have a copy! Thanks so much. Rick

Rick.Watson@PrinttEdd.com

 

[PrintEdd Rick]

Thank you, Ron!

Thank you, Ron, for your speedy reply with the owner's manual. Very helpful, sir!

 

[richardpress]

looking for the same manual

Seems the foot pedal needs adjusting on this unit, if you turn it on it just staples, unless you pull the foot pedal up. but no manual, so no idea how to do it. any help would be appreciated. my e-mail is "richardthelh@yahoo.com"

 

[PrintEdd Rick]

Emailing manual to you.

Here is Ron's email from when he sent the manual pdf to me. See the bold passage -- could be issue with clutch:

"No problem Rick, glad to help out someone else in need and pay it forward as it was sent to me by some kind soul from this forum. Good to be able to find this stuff for these old dinosaurs still in service! These are really well built machines made to last, seems like the most common problem with it is the clutch assembly gumming up with grease, just need to take apart, clean , lube, and re-assemble most times. Best of luck to you, Just an FYI, there are still places out there to get parts from what we’ve seen, if you have any questions, I work with a gut who has the info on a service company if needed as well. Good luck with your machine!
Ron
Ronald Sardineer [rsardineer@yahoo.com]


Rick

 

[PrintEdd Rick]

Changing from 20-25 wire to 19-21.5 on Acme-Morrison N3A-3/4"

Hi, We recently purchased an old Acme-Morrison N3A-3/4" that came set up with 20-25 wire. We need to use it with its larger spec'd wire, 19-21.5.

My question is -- Do I need to change any parts or settings when I change wire size? Ron (RSARDINE) sent me the Operating Manual pdf but I don't see any info about changing from one wire size to another.

On the first page of the manual though is a spot to write down the Wire Size (along with Model, Serial No., and Stitch Width) which led me to think that I may need to change out parts/head for different wire size -- or that this machine may not be compatible with larger wire.

I welcome any feedback! Thank you in advance.

Rick

 

[iamjoel]

I am also looking for the manual, and Google has utterly failed me. Could any one please send me the file? E-mail: iamjoel451@gmail.com

 

[PrintEdd Rick]

Sending it to your email now. Rick

 

[iamjoel]

Thanks, Rick! I appreciate the help

 

[mark kuchta]

new at this also looking for manul for acme morrison sticher model n3a-37a

 

[lindylyn]

I am looking for a Acme Steel Model N3A-3/4 Stitcher manual booklet. Does any one have a copy?

Linda
printing@bryanprintersartesianm.com

 

[nicktika]

Seeking operators manual for acme morrison

Guys I'm seeking manual as well, please it to me at cyberlinks12@yahoo.com. Please.

 

[TerriC]

Looking for a manual for Acme Steel N3A - 3/4 Stitcher

If anyone can help me with a copy of the manual or would be able to tell me what the different levers and settings should be, I would be greatly appreciative.

Thanks,
Terri

 

[TerriC]

Thanks

If anyone can help me with a copy of the manual or would be able to tell me what the different levers and settings should be, I would be greatly appreciative.

Thanks,
Terri

Thanks to CStahl for sending me the manual. I will attempt to attach it in case anyone else still needs it.

 

[CHOCK]

Hi, sir
what do you need exactly
back to me , maybe i can help you

 

[Jerome Als]

Good Day, i am trying to source some replacement parts for this same Acme-Morrison. Can anyone point me in the right or multiple directions?
email jerdavals@gmail.com
whats app 1246-261-6731

 

[WeberPrinting]

I created an user guide for this stitcher to assure that each person setup the machine in a similar way. Maybe this will help someone. 3 Page Document: