1. The Color Printing Forum Marketplace Forums can be useful for members who know one another well from forum discussions and offline communications and wish to post presses, equipment, or parts they either want or have for sale or trade. However, caution and good judgement should always be used. Especially when considering any business with anyone not already well known to you and trusted, due diligence must be used to confirm details and identity and be sure the transaction is safe before any money or property changes hands. Always use good judgement and perform due dilligence and follow these guidelines.

OMSCA feeder and delivery pumps. Will work for other presses also.

Discussion in 'Offset & Digital Presses for sale' started by klockdoc, Apr 15, 2013.

  1. klockdoc

    klockdoc New Member

    Joined:
    Jun 2009
    Messages:
    3
    Location:
    midwest
    Type DVT 2.80
    SNO B827278
    RPM 1700
    YEAR 1983
    H.P. 4.8 ------------------------------- FEEDER PUMP INFORMATION
    Max Press. 8.5
    Max Vacuum 18 HG
    Capacity 56.4


    Bar on top is labeled when looking at it with the outlets away from you reading left to right (see photo)

    1st Feed side tapes outlet
    2nd Feed Separator blast
    3rd Press Vacuum tapes
    4th Pressure for delivery side bar (blocked off)
    5th Venturi air

    Feeder_Pump_back_side.JPG

    MOTOR INFORMATION ON FEEDER PUMP COMBO

    HP 5
    PHASE 3
    HZ 60
    RPM 1735
    ---------------------- -Mfgr. Leroy-Somer
    V 200 A 14.6
    V 230 A 14.2
    V 460 A 7.1

    SF 115
    PF 78

    ________________________________________________________________________________________________________________
    Delivery Motor/Pump

    Volts 230
    Type T 10 BS
    Ser# C883837
    Year 1985
    Speed 1700
    Capacity 28.2
    Max Press 8.5 PSI 17.9 HG

    Delivery_Pump_2.JPG

    Both units were serviced at one time by Northern Compressor Company, Michigan

    Feeder pump was recently rebuilt. Only 1 year usage after repair.


    Ready to sell.
     
  2. klockdoc

    klockdoc New Member

    Joined:
    Jun 2009
    Messages:
    3
    Location:
    midwest
    Feeder Pump still available. Will work on any press
     
Loading...