Need help with Roland Control console

[egorus]

Are You have Man Roland (300 series) Control Console operator's manual in English?

 

[peheidelberg]

hi there i have some R300 control info you can email me at andrew.hagart@hotmail.com

 

[egorus]

Thanks. Man!

 

[rolandman]

Hi egorus, whats up, are you having problems with the console or do you just need to learn how to use it?

 

[egorus]

Our documentations in German, and Console too.
I speak English, a little

Operator's Manual I've found.

Now I'm looking for Central Control Console Manual.

 

[egorus]

And RolandMan, You are right. I just need to learn how to use it.

 

[rolandman]

im pretty sure you can change the language of the Console, but your gonna have to get a German Phrase book if im to talk you through it, it is done through the service screen on the consul, which on the row of buttons on the keypad is the third one up from the bottom

 

[egorus]

On the console only one language - Deutsch. No choice.

 

[rossio]

Hi mate,

ask for manuals of PECOM PressCenter. ((Process Electronic Control for Organization and Management), but send Type, year of manufacturing etc. of your Center to Data Base Documentation MANRoland Druckmaschinen AG - Offenbach Service: printservices@manroland.com

good luck
Rossio

 

[rolandman]

Egorus, I checked on my R700 (which has the Same Computer system as the 300) and managed to change from english to German And BAck Again, You do it in the following way, go to service which is the second button from the Bottom of the Column on the Right edge of the Keypad, set which is F3, and the first setting should be language. maybe your machine doesnt allow but that is how it is done ont he 700 maybe this will help

 

[egorus]

F3. Language Settings - Deutsch.
That all.
No choice.
"+", "-", "Tab", "Enter" - nothing, only "Deutsch"...
Maybe our machine doesnt allow do it.

 

[rolandman]

i see, can you understand any german? if not it will be very diffcult operating the press

 

[egorus]

That's why I'm looking for guidance in English. In PDF file.
A lot more tricks and print settings are made on the console.
Especially ink-water presettings to start printing.

 

[aqazi81]

Ask for the software update form MANRoland which supports English.

 

[controlgraphics]

That is correct. The console should allow a variety of languages. It is buit in the software.

 

[controlgraphics]

There is a diskette for languages. Maybe it needs to be uploaded again.

 

[lidajalalpour]

Hello sir
We have man roland 300, 5 color press
its 2000 model
we wanted to change one of the baenderwalze parts but we can't. we need some help. also we don't have the data base documentation for our man roland
could you please send us the data base documentation and some help.
thanks for your help

 

[sergios68]

in order to have the correct languaje you must order the langauaje diskette to manroland directly, send the machine Nr. and serial to offenbach, they will quote the diskette that is very easy to install, just put into floppy unit turn off and on then the diskette run its autoexe file and when is finish just remove the diskette and turn off and on again.