Multilith 1650 xe blows fuses

[williebrown]

We have a Multlith 1650 XE that has developed a problem today. I can inch the press forward & backward, but whenever I push the start button a fuse blows. Sometimes the press might move for a second or two, but then the fuse blows again. This is the second fuse hole the left on the main electronic board and is numberer "F-4"

I am at a total loss. Thanks for any suggestions.

 

[Richie]

Think get an electrician to have a look at your machine before you blow something else. Once had almost the same problem on a Heidelberg SORKZ at the end we found out there was a problem with one of the contactors.