Multigraphics SP990EI / Purup Eskofot 1740 Platemaker Tech Needed

Discussion in 'Platemaking' started by Don Prints, Aug 6, 2014.

  1. Don Prints

    Don Prints Member

    Joined:
    Dec 2012
    Messages:
    24
    Location:
    Eastlake, Ohio
    I have a Multigraphics SP 990EI giving me Error Code 4
    Error in Voltage Compensation of Exposure Time
    What do i need to fix this problem? I have another Platemaker i bought for parts.
    I have called all the graphics Dealers in the Cleveland Ohio Area and there are no techs for this machine.I Cannot find a Service Manual for this model, I have a Service Manual for a SP 990 But they are totally different. I am dead in the water without a platemaker, any help would be appreciated. I will pay you for your time if you can give me phone tech support.

    Thanks
    Don
     
    Don Prints, Aug 6, 2014
    #1
  2. Don Prints

    Don Prints Member

    Joined:
    Dec 2012
    Messages:
    24
    Location:
    Eastlake, Ohio
    Bump;
     
    Don Prints, Aug 8, 2014
    #2
  3. discountprintingservice

    discountprintingservice Senior Member

    Joined:
    Mar 2007
    Messages:
    141
    Location:
    Georgia
    Is this an old school camera platemaker?
     
    discountprintingservice, Jan 6, 2015
    #3