MC80 A collator relay

When I turn on the main switch, the relay does not kick in. My question is, where is this relay located? I have looked in the box on the bottom, and the front and the back even. It sounds like it is in the top on the other tower, but I can't find it. Any suggestions ?

 

Hi sir,
Hope you are well
normally all component are located in the main cabinet whre
the main switch or push button control are.
However see in your schematic diagram , the section location device or part
and find it.
The problem with the relay can be: 1) switch dirty or defective 2) lack of voltage, by breaker or fuse blown or tripped 3) coil reheating or
burn. or some cable of coil loose, or break or burn or oxide.
Let me know for to guide you

 

Thanks for your reply. I don't have a wiring schematic, all I have is the operators manual. I'll have to use the other tower as a guide I think. I know standard doesn't like to share. Are there any hidden fuses ? I have checked all the ones in the bottom box. There is voltage to all of the fuses as well.