Manroland 202 - How to set water dampeners

Discussion in 'Man Roland Printing Presses' started by auchprinting, Mar 6, 2012.

  1. auchprinting

    auchprinting Senior Member

    Joined:
    Dec 2010
    Messages:
    51
    Location:
    Glenside, PA, USA
    What is the procedure for setting dampener rollers on the 202? Keep getting scum on left hand side of sheets, 3/4 of the sheet is completely clean.
     
  2. spike

    spike Senior Member

    Joined:
    Apr 2011
    Messages:
    139
    Location:
    new york
    first youneed to put some ink on the ends and middle of the metering roller so you can stripe it to the pan 4mm
    then to fat steel 4-5 mm then water form to fat steel 5mm then water form to plate 6-7mm try to roll an even ink
    film onto to meter and water
     
Loading...