Man Roland Practica PRZ 00

Sorin C,
this is high speed and pulse length protection. You need to reset the CPU. If necessary, the slow motion speed must be adjusted. Turn off the machine. The third microswitch-on.(processor rack) Turn on the machine. Wait 20 seconds. Turn off. All MS on off. Turn on and try.
...suna.

 

The problem is when I use the pulse button, after a few pulses it still works, and error 5007 appears.
From that moment, neither impulse nor continuous walking works anymore.
Thanks in advance for your help!

 

The board containing the processor has 2 buttons - one yellow and one black
Please, if you can help me specify in more detail the steps to follow
Thanks!

 

Hello Chock, Can you help me with a similar machime manroland error 1003 we buy this machine and test all but now whe instal in the warehouse and is showing this error code, when we push stop button and quit stop the machine breaker turn off

 

Hi sir:

Please taking out the electronic board, and clean very well the Edge connector of PCB, with erase pencil, and clean then with Spray electronic clean contacts.

Of course, you must see , if there are some PCB, with colder+ Dry solder joint, in this case you must reheating the PCB.