Man Roland 200

Hello everyone,
we have a problem with the impression of man roland 201 t ob.
the impression does NOT turn on when the machine is operating. We also tried to turn it on manually with the button, but we can't.
The electromagnet that should turn it on keeps flickering.

 

Hi sir:

If the electromagnetic, is NOT pull in, with the impression, try to clean it, otherwise, you must to have to replace, to due the magnet that is fault, by the use. .However measure if the voltage is o.k in the terminal, look for loose wires, or corrodes, or semi broken wires, or coil of solenoid, is OVerheating( not burning), time to replace it or make a new windinding.!

 

Thank you for your honest and quick reply which is very helpful.
we took out the electromagnet and we will check it with the parameters and if necessary we will make new windinding.

greeting.

 

Ok, sir.

Let me know, sincerely

 

Dear sir,
We solved it. The whole problem turned out to be the cable that powers the electromagnet... Thank you for your help

 

There is a fuse , in the target u6

 

Hi everyone I have a problem in Roland 200
Problem error: 89 guard circuit trouble can anyone please help for this problem

 

It's a door, check the locks.