MAN Roland 200 T OB Register problem

Discussion in 'Man Roland Printing Presses' started by Vlatko, Apr 4, 2023.

  1. Vlatko

    Vlatko Member

    Joined:
    Mar 2021
    Messages:
    6
    Location:
    Kavadarci - Macedonia
    We have a Man Roland 200 single color and we have a problem with register. I am also sending you a picture of a print.
    On the side of the paper that is on vacuum sideguide, on the right side the register is good (picture 1), on the other side of the paper, left side, the register is not good (picture 2), as in the picture. Both pictures are from the entrance side of the paper. All grippers on the swinging arm have been replaced.

    if anyone can give advice
    We thank you
     

    Attached Files:

  2. drukman

    drukman Senior Member

    Joined:
    Mar 2016
    Messages:
    272
    Location:
    Bulgaria
    Adjustment of the gripper rollers of the impression cylinder.
    R200Gripp.jpg
     
Loading...