Main Drive malfunction, help me please

Discussion in 'Heidelberg Printing Presses' started by heroelinka, Oct 26, 2019.

  1. heroelinka

    heroelinka Member

    Joined:
    Oct 2019
    Messages:
    7
    Location:
    Indonesia
    please help a solution from everyone. I am now in trouble, my machine Heidelberg SM 52 4 COLOR 2014 error can not be inched and running. please help.
     

    Attached Files:

  2. Lopez Jaena

    Lopez Jaena Member

    Joined:
    Jul 2019
    Messages:
    7
    Location:
    canada
    Is this new install?
     
  3. heroelinka

    heroelinka Member

    Joined:
    Oct 2019
    Messages:
    7
    Location:
    Indonesia
    @Lopez Jaena
    I bought the machine in December 2014 with new conditions, it was installed in Heidelberg Indonesia in January 2015 and I have used it until now.
     
  4. heroelinka

    heroelinka Member

    Joined:
    Oct 2019
    Messages:
    7
    Location:
    Indonesia
    This information of error' message history
     

    Attached Files:

  5. Waqas_zahid

    Waqas_zahid Senior Member

    Joined:
    May 2011
    Messages:
    234
    Location:
    Pakistan
    Have you checked the two fuses on the MDPS? I wonder how come you had encoder errors before and now you end up with this
     
  6. heroelinka

    heroelinka Member

    Joined:
    Oct 2019
    Messages:
    7
    Location:
    Indonesia
    MDPS has been checked and cleaned, all conditions are good
     
  7. heroelinka

    heroelinka Member

    Joined:
    Oct 2019
    Messages:
    7
    Location:
    Indonesia
    sometimes when the engine is turned on, there isn't any error on the touch screen display, but when it is inched at the beep sound the two machines don't want to spin due to braking themselves.
     
  8. Waqas_zahid

    Waqas_zahid Senior Member

    Joined:
    May 2011
    Messages:
    234
    Location:
    Pakistan
    When you turn the press by using the hand crank just to change the position of the motor does the motor run sometimes?
     

  9. Graphics Support

    Graphics Support Member

    Joined:
    Nov 2019
    Messages:
    2
    Location:
    Canada
    Did you fix the problem?
     
Loading...