Machine did not run

[Shay alon print]

Hello, I have a problem with the machine, sm 102 2p 2002 as soon as you try to run the machine, it stops after a second. We changed the encoder of the main engine and now in the diagnostics there is another fault. We checked the cable of the encoder is fine, what could be the problem?

 

[Mathew]

Hi,
This is a common issue from the machines with UVM3 module. The problem indicates the failure during brake test. You need to replace UVM module with new generation or repair the old one.
Good luck

 

[Adil]

Hi sir .
in your case the brake control is impossible, you must check the defective UVM power transistors or the BAM is defective
Good luck

 

[Shay alon print]

Hello, after replacing the module uvm, the machine is back to work, thank you very much,
you helped a lot