looking for pull lay double sheet sensor of SM74

Discussion in 'Heidelberg Printing Presses' started by Waqas_zahid, Jan 21, 2016.

  1. Waqas_zahid

    Waqas_zahid Senior Member

    Joined:
    May 2011
    Messages:
    124
    Location:
    Pakistan
    Hi,

    I am looking for this particular sensor,

    Brand: Baumer
    Type: Inductive
    HDM# M2.161.1531
     
  2. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    325
    Location:
    Kolding-Denmark
    Hello Zahid,
    This type of inductive sensors are produced specifically for Heidelberg by Baumer and that's the reason make them expensive. Once I've got from Pulstronic. It was the same as original but took a longer time for adjustments. Hope you can find it in your local market.
    Good luck,
     
    Johnson Tanoto likes this.
  3. Waqas_zahid

    Waqas_zahid Senior Member

    Joined:
    May 2011
    Messages:
    124
    Location:
    Pakistan
    Thanks for the response Mathew,

    Is it possible for you to give me more details about this particular pulstronic sensor? The baumer sensor is no longer being offered by the manufacture.
     
  4. aqazi81

    aqazi81 Senior Member

    Joined:
    Oct 2009
    Messages:
    821
    Location:
    KARACHI PAKISTAN
    Can you share the serial number of the press and is it modular or compact?
     
  5. Waqas_zahid

    Waqas_zahid Senior Member

    Joined:
    May 2011
    Messages:
    124
    Location:
    Pakistan
    Hello,

    Its a modular press, btw I just wanted to know if there is a DBK pull lay double sheet detector menu for this machine and can I access it?
     
  6. exheidmech

    exheidmech Senior Member

    Joined:
    May 2009
    Messages:
    674
    Location:
    USA
    Not sure exactly what your looking for in a double sheet detector screen. Feedback from the detectors can be found in the Ma screen in the service wrench screens. Not sure exactly which software you have but its usually the first row of numbers. Only the selected side guide will show feedback.
     
  7. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    325
    Location:
    Kolding-Denmark
    Hi everyone,
    If it is Pre-Drupa 98, it may equipped by Baummer sensors instead of Micro-Epsilon. In this there is menu for DBK. You have to check "analog input" actual values.

    Good luck,
     
  8. PKT FDO

    PKT FDO Member

    Joined:
    Oct 2014
    Messages:
    36
    Location:
    battaramulla-srilanka
    Dear Waqas, i have one sensor( 61.161.1531).i dont know it same to M2.161.1531.What are you thinking?
     
  9. tadeo

    tadeo New Member

    Joined:
    Dec 2017
    Messages:
    1
    Location:
    El Salvador

    Zahid
    were you able to find the sensor, i looking for that sensor too and cant find it anywhere , is there any alternative to it?
     
  10. Waqas_zahid

    Waqas_zahid Senior Member

    Joined:
    May 2011
    Messages:
    124
    Location:
    Pakistan
    A friend of mine tracked down a used piece in England but the customer wasn't interested and later on I narrowed down the problem to a Faulty SAK analog input, it was quite some time ago
     
  11. Johnson Tanoto

    Johnson Tanoto Member

    Joined:
    Jun 2018
    Messages:
    15
    Location:
    Indonesia
    Dear Mathew,

    Could you tell me what type of pulstronic sensor did you used?
     
  12. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,601
    Location:
    Managua,Nicaragua
    Hi sir
    I can help you
    But need:1) Serial number 2) Model of machine 3 ) parts number exactly
     

  13. Johnson Tanoto

    Johnson Tanoto Member

    Joined:
    Jun 2018
    Messages:
    15
    Location:
    Indonesia
    Dear sir,

    My machine is speedmaster 52, part number is g2.161.1531, and my machine serial is 200246. Thank you very much for your help
     
Loading...