Lateral Ink Distribution on 1996 Heidelberg CD 102

[Chris Rogers]

Hi, I've already saw a thread about this, but it wasn't really clear how to make this adjustment manually on the DS of the press. I've made this adjustment in the past on a newer Komori from my console but all of our presses at my current shop are pre 2000's. My shop bought the 1996 Heidelberg press I'm on "used", and all I have is a photocopied manual from the install when I wasn't working there at the time, and there's not much to go when adjusting this. Like I said, I've done it on a console and understand the number range "0-710" but I do not understand where the press should be at when I adjust it in relation to the mechanical arm(assuming press being used it's set/not set around the standard 400 already, and what the "black and white" reference is all about. Any help, or diagrams would be much appreciated.

 

[Jack liston]

You can inch the machine and see how far the osscilator moves past the form rollers then make your judgement if I remember you have to move oscillating roller even with form rollers then make small changes.and lock the bolts on the arm.

 

[Adil]