Kompac ii problem

Discussion in '1-Color and 2-Color Offset Presses' started by EUNI, Oct 16, 2011.

  1. EUNI

    EUNI Member

    Joined:
    Feb 2011
    Messages:
    8
    Location:
    TEMA, GHANA
    Hi.
    I mave a kompac ii on my gestetner 313.
    Any time i print on glossy paper and the image has some solid in it, small beads of water forms at the edge of the solid. Any ideas on what could be happening?
     
  2. plotter

    plotter Senior Member

    Joined:
    Feb 2009
    Messages:
    376
    Location:
    south wales uk
    check the nip, nothing really to go wrong with these. on small presses up the ink flow to the solid. if its really bad it could be a worn roller or bearing
     
  3. EUNI

    EUNI Member

    Joined:
    Feb 2011
    Messages:
    8
    Location:
    TEMA, GHANA
    Thanks Plotter. will try that. Do you have know where I can get a user, service manual for gestetner 313?
     
Loading...