Komori PQC I - KMS connection

Hello Friends
1997 model Komori L 428, I want to install kms system on the machine with pqc 1 control desk. There is no computer desk in addition to the pqc control desk. (there is no table marked in the picture) What is necessary for me to connect directly to the Pqc 1 table? can you help me. ?

 

Hi VTB, I'm also looking for KMS-PQC help (L840 SP). Did you get any docs or instructions yet?

 

Hello Paul,
I can help you with this. You can reach me at vtburak@gmail.com. I will need information and photographs about the PQC table and computer of the machine.

 

Thanks! I attached pics of the PQC, KMS computer and KMS screen-shots. The PC running KMS version 2 is Windows XP with a MOXA CP-114 board. I've connected the PQC to both the RS232 and RS422. Also of note is that the cable from KMS doesn't go directly into the PQC, you can see from the pics of the KMS computer cables compared to the PQC console underside the cable doesn't go there. I hand-traced the cable to the rear of the press, the feeder, in a cabinet with a label saying, "Komori Safety Device", pics of that attached too. I can't trace the cable from there back to the PQC because I don't know which cable it would be either at the PQC or in the "Safety Device" cabinet.

 

more pics: KMS screenshots

 

more KMS screenshots:

 

Hi Paul
I think the machine was produced between 1995-1998. In machines produced between these years, the PC is not directly connected to PQC. It is connected to the dimensioning table on the right side of the PQC or to the Pdc table on the left side. The issue has nothing to do with the cable in the Feader section.

Was KMS working in previous years? If it works, with a remote connection program. For example; I would like to connect with Anydesk.