Komori L225b Machine won't Reset

Discussion in 'Komori Printing Presses' started by Willycom, Aug 29, 2018.

  1. Willycom

    Willycom Member

    Joined:
    Feb 2018
    Messages:
    6
    Location:
    Australia
    Does anyone know how the reset circuit works on the Komori L225b. We have checked all the safety trips on doors and things like paper detector at the delivery table and the delivery table full switch.
    All motors including the main motor by switching the contactors in the circuit box and the air pump and feeder lift work ok.
    The reset seems to do nothing at all when pressed. No bell and the motor start buttons on the control panel do nothing.
    Any help given would be great to receive.

    Willycom
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,063
    Location:
    Managua,Nicaragua
    Hi sir:
    I can Not understand well, what is the problem
    1) is the machine Running or Not?
    2) For what need to be Reset the machine??
    Let me know
    Blessing
    superchock@yandex.com
    cell+WahtsApp:+505 88611441
     
  3. Willycom

    Willycom Member

    Joined:
    Feb 2018
    Messages:
    6
    Location:
    Australia
    Hi Chock,
    Thanks for replying,
    No the machine will not start.
    The machine is set to use a warning bell before being able to start.
    The reset seems to set up a control circuit before starting.

    Let me know if you need further info

    Willycom
     

  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,063
    Location:
    Managua,Nicaragua
    Hi :
    1) Look for some Limit switch open or faulty
    2) Solenoid power source 200Vac
    3) Control power +24Vdc
    4)Brake power source 90Vdc.
    5) If the machine is coming with PLC: Look for some LED lit or Off according with his schematic.
    Blessing
    superchock@yandex.com
    cell+WahtsApp:+505 88611441
     
Loading...

Share This Page