Komori Feeder table problem
- Thread starter Nitin
- Start date
Advertisement:
CHOCK
Senior Member
- Joined
- 2016
- Posts
- 3,127
- Geo
- Managua,Nicaragua
Hi sir:
Look for the limit switch LS-fds , must be closed and the LED will be LIT, check this condition.
Otherwise, adjust and test the limit switch, for loose wires, dirty, open, or faulty switch.
Since his machine has PLC, please look if the +24Vdc has in the electronic board for Input and output according with his schematic electrical diagrams.
Look for the limit switch LS-fds , must be closed and the LED will be LIT, check this condition.
Otherwise, adjust and test the limit switch, for loose wires, dirty, open, or faulty switch.
Since his machine has PLC, please look if the +24Vdc has in the electronic board for Input and output according with his schematic electrical diagrams.
Forum posts represent the experience, opinion, and view of individual users. The Color Printing Forum does not necessarily endorse nor share the view of each individual post.
When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.
Similar threads
