Komori 628 Form Settings

Discussion in 'Komori Printing Presses' started by printerjay, Aug 19, 2015.

  1. printerjay

    printerjay New Member

    Joined:
    Aug 2015
    Messages:
    3
    Location:
    Florida
    I started running a Komori Lithrone 628 a couple of weeks ago. I was going through the manual for instructions on setting the forms to the plate as I have no one to ask. The manual doesn't show where the adjustments are. I don't have time right now to start pulling rollers to figure it out. Anyone have some insight?Specifically right now I'm looking for the B form to the plate. Thanks.
     
  2. Vic the Printer

    Vic the Printer Member

    Joined:
    Aug 2008
    Messages:
    70
    Location:
    United States
    depending on which Lithrone you'll need to take out the wash up tray, you'll see the adjustment screws clockwise for more
     
  3. printerjay

    printerjay New Member

    Joined:
    Aug 2015
    Messages:
    3
    Location:
    Florida
    I was under the impression that the adjustments for the b and a forms were on the feeder side of the unit. Thanks for the input.
     
Loading...