Komori 5 color Lamp failure

Discussion in 'Komori Printing Presses' started by Printermike, Jun 26, 2013.

  1. Printermike

    Printermike Member

    Joined:
    Jun 2009
    Messages:
    51
    Location:
    Northern New Jersey
    Pressman just told me he has a Lamp Failure DSD. It says electrostatic double sheet detector failure.

    Is this something we can replace the part on ourselves? Pressman doesn't see a bulb
    that can be replaced.

    Any ideas??

    Mike
     
  2. presselectronics

    presselectronics Senior Member

    Joined:
    Oct 2011
    Messages:
    150
    Location:
    North America
    The lamps are underneath the paddle foot that goes up and down. Located in the center of the feed board almost to the swing gripper. I usually also replace the paddle while I am at it. How handy are you? Do you know how to adjust? If not, have a tech do it.
     
  3. Printermike

    Printermike Member

    Joined:
    Jun 2009
    Messages:
    51
    Location:
    Northern New Jersey
    Lamp

    Thanks for the reply. We cleaned under the pad and that
    Did the job.

    Mike
     
Loading...