KBA Planeta SHARP monitor

Hi, I have a problem with a Planeta control table monitor. Unfortunately the monitor no longer works and I need to know if anyone has a spare monitor or a solution to connect a normal VGA monitor to this system. The monitor in question is SHARP CZ-603D-GY. Thanks everyone in advance.

 

Very often, older beam monitors have a problem with the contact board located at the rear end of the glass. Soldering contacts on this board helped my thirty-year-old TV. The first option is to find an electronics engineer
The second option is to replace the connector on the cable from the remote with a three-row SVGA connector and try to connect a VGA-HDMI adapter to it.
The third option is to buy such a worker in Japan.

 

Dear Friends,

Keep your old control systems in a good order on its duty as long as possible. Any newer control system is less reliable, less easy in use and in maintenance, less secure (if someone trusts on this scam trick yet), and more expensive.

Our Labs perform repair, refurbishment, replacement of such monitors with CRT or LCD monitors and video interface adaptation when required, and more for KBA, for EAE and for other control systems of different offset and web-fed printing machines.

More detailed information is placed here:
https://www.colorprintingforum.com/...ion-printing-machinery-controls-repair.22963/

Anyone interested should contact directly by e-mail, with a formal data of his organization, with a technical information of a target industrial control/computer/monitor, formulating clearly his technical and commercial goals.

Regards,
Alex Sapiro

 

You can change the display controller card in the system into vga compatible and then connect any vga monitor.