K2 Coater

Hi, can Spot UV coating be achieved on a K2 Coater, the ones that use an AB Dick press to feed? I just need to feed some 16pt sheets, and reserve the glue flap, of some small boxes, so no tight register requiered.

 

I used to work for K2 Systems in texas, remember that you are suposed to be using 0.052" blanket and under packing; just cut the under packing or cut the blanket with the under packing.
There is an other option, utilizing a photo polymer similar to the rubber stamps. This shuld fit the same size and thikness as the blanket and install it like a blanket