ITEK 975PFA for printing envelopes?

Discussion in '1-Color and 2-Color Offset Presses' started by jfprinting, Jul 8, 2012.

  1. jfprinting

    jfprinting New Member

    Joined:
    Jul 2012
    Messages:
    1
    Location:
    Queensland Australia
    Hi everyone, we recently inherited an ITEK 975PFA and I was wondering if anybody knows if these are capable of printing envelopes (specifically #10 & DL size - 110mm x 220mm) We usually run envelopes on our GTO46 but have too much NCR work on this machine now so were thinking we may be able to run the envelopes on the ITEK. Is this possible and if so could anybody give me some pointers on setting the machine up for this size range? Thanks
     
  2. rossio

    rossio Senior Member

    Joined:
    Jul 2009
    Messages:
    159
    Location:
    Baltic Sea,Germany
    "Versuch macht kluch" means: you´ll never know until you try.
    ITEK 975PFA is similar to Ryobi 3200 afaik. Perhaps someone knows if it´s capable.
    printing envelopes is not a witchcraft, I did it on different machines.
     
  3. ziggy33

    ziggy33 Senior Member

    Joined:
    Jul 2010
    Messages:
    451
    Location:
    Rice Lake WI
    It's possible yes you just need a envelope feeder that will hook up to it something similar to the abdick 1200 env feeder I use on my ryobi 3200. I have even ran 6 and 3/4 envelopes on mine you just gotta mess around till it runs em good and registers

    -Ziggys Press Repair
    Rice Lake WI
     
Loading...