IR bulb replacement

Discussion in 'Heidelberg Printing Presses' started by Jack liston, Sep 17, 2019.

  1. Jack liston

    Jack liston Senior Member

    Joined:
    Sep 2019
    Messages:
    265
    Location:
    Connecticut
    Hello gentlemen been a while since I've been here am now running a sm102 not familiar with changing the IR bulbs it's a graphicx1986 I could use some help do I have to unhook the power supply lines to slide the box out what should I look for manual is in German thanks for the help . Spike
     
  2. junker1984

    junker1984 Senior Member

    Joined:
    Jan 2010
    Messages:
    1,031
    Location:
    US, Midwest
    Does the slide out cartridge have an Anphenol connector and a single hose connection? That's the only version I recall. The mid 80's vintage is too far back for me to remember specifics. If there is no quick disconnect electrical connection, see if there's enough slack in the power cable to enable you to pull the cartridge out fully. If it seems the cable is too short to pull cartridge out fully, check for cable ties in the cable run. A pic may help.
     
  3. Jack liston

    Jack liston Senior Member

    Joined:
    Sep 2019
    Messages:
    265
    Location:
    Connecticut
    Thanks junker it is the dryer you described will be careful when I have to open it
     
Loading...