Ink duct foam strip - qmdi classic 1997

Discussion in 'DI Presses' started by maverick1971, Aug 30, 2016.

  1. maverick1971

    maverick1971 Senior Member

    Joined:
    Jul 2011
    Messages:
    139
    Location:
    South Africa
    Can anyone please advise where I can get the thin foam strips that are located just in front of the ink keys and under the clear tape that goes over the ink keys and under the ink duct foil?

    I hope that makes sense!! It is a very thin and soft strip of foam that sits just on top of the ink keys. It is covered by the self adhesive tape that goes over the keys.

    Does anyone know what the part number for this foam is? Is it available from Heidelberg? Please advise.

    Many Thanks

    Shawn
     
  2. Bill Borcicky

    Bill Borcicky Senior Member

    Joined:
    Jul 2012
    Messages:
    212
    Location:
    U.S. Amory, Ms.
    yes, Heidelberg does sell them. I had run a qmdi for a few years in the last shop I worked for. The "tape", you are talking about, is on most heidelberg presses now days. a quick call to heidelberg and they should fix you up with what you need. You will have to give your model # to them so they can match up the right size for your machine.
     
  3. jan

    jan Senior Member

    Joined:
    May 2009
    Messages:
    236
    Location:
    Austria & Poland
    Hi Shawn
    here are HDA part numbers and prices from last year:

    > 1 A4.008.335 /06 foil (plus di) € 56,14
    > 2 00.472.0085 protective film € 22,51 1 Rolle = 12 Stk.
    > 3 63.008.144 /04 isulating type € 1,05 per Stk
    > 4 00.580.1010 tape, € 8,29 1 Rolle = 10 Mt.
    rgds
    Jan
     

  4. ARTENGO

    ARTENGO Member

    Joined:
    Dec 2010
    Messages:
    8
    Location:
    FRENCH WEST INDIES
    Hi Shawn,
    I think we need also the same foam.
    Can you tell me if this foam goes on the metallic plate on the picture attached ?
    Thank you for that.
    Regards.
    Alan
     

    Attached Files:

Loading...