Inconsisties on the Yellow

Discussion in 'Xerox iGen3, iGen4, & iGen5 Digital Presses' started by Kiran04, Jan 21, 2015.

  1. Kiran04

    Kiran04 Senior Member

    Joined:
    Aug 2014
    Messages:
    165
    Location:
    Santa Fe
    Moving in the fusing direction, not the process direction. I get bands of red from the leading edge to the trailing edge of the image that only appears on yellow heavy jobs. The densitometer shows that it's the yellow fluctuating over the page, not the magenta. Any ideas what's causing it?
     
  2. Milo Wilson

    Milo Wilson Senior Member

    Joined:
    Dec 2007
    Messages:
    477
    Location:
    Arkansas
    Have you run the color seperation diagnostic test yet to see if it is the ROS, charge or developer assy?
     
  3. Kiran04

    Kiran04 Senior Member

    Joined:
    Aug 2014
    Messages:
    165
    Location:
    Santa Fe
    What exactly am I looking for in all of these? This isn't a diagnostic I'm familiar with.
     
  4. Milo Wilson

    Milo Wilson Senior Member

    Joined:
    Dec 2007
    Messages:
    477
    Location:
    Arkansas
    Give me a call 714 292 6912
     

  5. Swifty2

    Swifty2 Senior Member

    Joined:
    Mar 2013
    Messages:
    300
    Location:
    Ma.
    disable edge enhancement under image quality and see if it helps
     
Loading...