Image prints on impression cylinder

Discussion in 'DI Presses' started by Minteman Dan, Apr 30, 2021.

  1. Minteman Dan

    Minteman Dan New Member

    Joined:
    Apr 30, 2021
    Messages:
    2
    Location:
    Alberta Canada
    We are getting an image printing on the impression cylinder. It's almost like the blanket is not dropping off soon enough. We cleaned and replaced the pneumatics, still getting the image on the impression cylinder.
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,903
    Location:
    Managua,Nicaragua
    Hi sir

    What mark is DI press?

     
  3. Minteman Dan

    Minteman Dan New Member

    Joined:
    Apr 30, 2021
    Messages:
    2
    Location:
    Alberta Canada
    Presstek 3404
     

  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    1,903
    Location:
    Managua,Nicaragua
    Check this;
    1. Check the blanket packing thickness.

    2. Check the impression pressure adjustment dial
    setting.

    3. Replace the blanket.
    (When the blanket is partially smashed.)
     
Loading...