IJetColor NXT envelope printing system for sale in NJ.

Hi, thank you visiting my listing.
I just picked up this lease retun system - iJetColor NXT.
Has printer+conveyor
Rip PC with Monitor/Arm
On two custom tables.
$12,995
Can palletize, crate and help with shipping arragements.

NOTE: Printer was professionally de-installed and de-inked. With that I can not demonstrate print quality and life remaining of maintenance items. Please assume that new maintenance items may be needed immediately or soon.
Also CMY ink cartridges are missing, 2x K cartridges are with the package.

 

This unit is corporate lease return out of University

 

Bump - still available.

 

Lets do better: $12,000 palletized+crated+shipped within mainland USA

 

Still available?

 

Hi. System is sold.

 

Kevin, are you interested in this specific system? Or in envelope print system generally? I will have beutiful, just returned from lease, Xante En-Press system avaliable in a couple of days.
I already checked it out, was waiting for financial institution to release it, they just did. It has 180k total b/w+color which is nothing, looks great, some new toners cartridges in the package, etc.
Please LMK if this is something you'd consider. It will be fully serviced, tuned-up and ready to work right out of the box.

 

Hi,
We have a couple Xante's already. Do you have any Riso Comcolors or anything with the HP FI-1000 print head? Or anything else Memjet?
Thanks,
Kevin

 

These units rather rare at least from my sources. I will take note and let you know when/if anything shows up

 

Thanks much

 

Engineer i really need help on my Xerox DC242, I am having cyan and yellow lines on the print out, but when I print for a long continuously, the lines disappear? please what is happening to my printer and also I want to thank you for the advice on the Oki Pro9431, I really appreciate

 

Hi, I do not know Xerox machines. Universally, if issue with specific color(s) I'd try changing Drum Blade (if available separatelly) or Drum Unit of the problematic color.
Above works if isssues clearly with pure cyan and or magenta.
Also inspect the condition of Fuser rollers.
Offen, when it gets better with quantity, it means that fuser rollers cleaning us.
If you get distinguished lines, take a page with those flaws put it on the clean table, take a Cyan drum out and put it on the top of that page, centered. Just take a look if there is toner residue on the drum surface where you see flaws on the prints.
Note: please do not touch drum surface with your fingers, also keep in mind that drum coating is very fragile, just be careful.

 

actually the problem is pure cyan and pure yellow sometimes at different areas, sometimes disappear in long run, what baffled me is that sometimes too only cyan, yellow disappear, below i a sample of the print out

 

I would start with inspecting Drum Units... When were your drums serviced or replaced last? These machines been on the market for a while, I'd assume there are good quality aftermarket components should be available. Order set drum blades and Primary Charge components - sometimes it is a roller PCR roller or corona wire - it is platinum coated wire and a grid, these should not be very expensive, if you're drum units are not so fresh - it is a good idea to service them.
Also, keep in mind that upon new blades installation, drums need to be coated with Teflon Drum powder, for that initial start-up turn, otherwise excessive friction because everything new/clean, it can flip the blade and ruin blade and/or drum. Having industry professional servicing your machine is highly advised otherwise, in case off error, all the potential savings from DIY could be out of the door. Or... there is always a youtube.
Disclaimer: I assume - you know what you're doing and just asking for a second opinion.

 

Okay the printer has been sitting down for a year before it was handed to me

 

OK. Drum blades replacement makes even more sense as those are made out of silicone and have shelf life as well besides wear from use. They could dry up eventually and loose elasticity causing lines, toning, etc.