iGen 150 mail tab (wafer seal issue)

[novomatt]

We have an iGen 150 that we produce a monthly mailer on. The mailer is printed on 70# Offset. The mailhouse is having trouble with clear tabs or wafer seals sticking to the newsletter. We are using fuser oil 2.

Please help...

Thanks.

Jack

 

[CargoPantsMan]

Switch the machine fuser fluid I.
Will still be a bit slick, but will definitely help with tabs and glue.

 

[novomatt]

Thanks for the suggestion. The iGen 150 does not run well with fuser oil 1. We switched to 2 because we were using many heat rolls and our perfect binding glue would not stick. Xerox recommends fuser oil 2 for the 150. What a conundrum.

 

[peels]

Thanks for the suggestion. The iGen 150 does not run well with fuser oil 1. We switched to 2 because we were using many heat rolls and our perfect binding glue would not stick. Xerox recommends fuser oil 2 for the 150. What a conundrum.

Xerox: its german, for "conundrum"

I have NO clue how to solve that one. only add pointless humor. welcome to the site.

 

[mbusko]

A while ago some fellow was touting a product called Fuzer Tabs that would stick with our fuser oil. Go to top of this page and search wafer tabs and find this guy and company.