IGen 150 and IGen 4 voltage and frequency requirements to operate

Discussion in 'Xerox iGen3, iGen4, & iGen5 Digital Presses' started by Amer, Jul 2, 2019.

  1. Amer

    Amer New Member

    Joined:
    Jul 2019
    Messages:
    3
    Location:
    Benghazi
    Hello,

    I need your help, I’ve bought two machines one is IGen150 and the other is IGen 4.

    I need to know on which frequency could operate on 50Hz or 60 Hz and the other matter what the requirements voltage value that they need and if 3 phase or 1 phase.

    Your prompt helping is appreciated

    Amer
     
  2. Milo Wilson

    Milo Wilson Senior Member

    Joined:
    Dec 2007
    Messages:
    413
    Location:
    Arkansas
    You can call me at 714-292-6912 for any help you need. I offer self service training also.
     
    Amer likes this.
  3. Amer

    Amer New Member

    Joined:
    Jul 2019
    Messages:
    3
    Location:
    Benghazi
    Thank you for your support,

    Please could you advice if the engine printer work on 50Hz(220/380V) or on 60Hz (120/208V). Or both of them.
    Your advice will be very appreciated.
    Thank you
     
  4. Milo Wilson

    Milo Wilson Senior Member

    Joined:
    Dec 2007
    Messages:
    413
    Location:
    Arkansas
    Did you buy the Igen 150 and 4 from the United States? I would need to know the serial number of each machine to determine if they're 50 hertz or 60 hertz machines
     
    Amer likes this.
  5. Amer

    Amer New Member

    Joined:
    Jul 2019
    Messages:
    3
    Location:
    Benghazi
    Yes, I have bought from USA and following the serial number and count for each one
    Thanks,

    - XRD004674 , total count ( 9,208,511 ), With valid license.

    - XRD004573, total count ( 13,600,000 ), With valid license.
     

  6. Milo Wilson

    Milo Wilson Senior Member

    Joined:
    Dec 2007
    Messages:
    413
    Location:
    Arkansas
    They run on 3 phase 60 hz.
     
Loading...