I want the correct measurements for the gto 52 machine

[junker1984]

I don’t understand.

 

[ali 120]

I don’t understand.

Is it possible to measure the printing cylinder holder and the blanket cylinder holder with a device?
Like the attached picture

 

[mantman]

You want to measure the bearer rings if they are worn out?

 

[ali 120]

You want to measure the bearer rings if they are worn out?

yas

 

[junker1984]

Not really, though you may check relationship to cylinder surface with a packing gauge, and check in multiple areas which may show variances. Go for the easiest and cheapest route first, have your bearer pressures checked and set (given you don’t see visible signs of rotational wear, the height relationship to cylinder surface appears to be acceptable, and by using a dial indicator, check cylinder and bearer ring runout).

 

[ali 120]

Not really, though you may check relationship to cylinder surface with a packing gauge, and check in multiple areas which may show variances. Go for the easiest and cheapest route first, have your bearer pressures checked and set (given you don’t see visible signs of rotational wear, the height relationship to cylinder surface appears to be acceptable, and by using a dial indicator, check cylinder and bearer ring runout).

There is some very minor wear to the print roller holder and blanket roller holder. I will send you a picture of them soon.