HP indigo WS6000

Random magenta streaks at the gear side of the sheet. Changed bid base and roller, rebuilt ink. Goes for a few hours then comes back. Normally starts after a few minutes of printing

 

Show picture of it. Which software are you using?

 

Have you checked the Ink Flow?
Have you performed Bid Electrode Calibration?
Have you tried swapping BDU with another unit and see if the streaks stay in the same color or change to the other unit? (as a last resource)

And yes, would you upload some pictures? to have a better idea

 

veluste@hotmail.com
anyone needs ink (press 6600-6900, indigo 20,000)
I could provide steady amount monthly

 

time to fix machine
Anyone needs a good DigiTax we not only provide but also check for your problems before you made any buy and sell
lots of problems could occur and the worst case is to buy a wrong replacement parts !! Waste time and money!
Or worst buy from eBAY and its not even a working one!
We tested all our parts before with two HP certified engineer (experience more than 5 years& 7 years ) and test on our own machine before shipping.