hp indigo 5000 error failure impression engage ADC calibration failed

any help guys :
impression engage ADC calibration failed status cod 6 DSC 6 calibrate ADC command failedwith status 48/110 v fault ,check fuse
error attached picture

 

Update i did the falowing :
i switch the pcn board
i cleaned the connector
i switch the motor from another machine include sensor
the only thing i need to know is where's the fuse(48/110 faulty ) because i checked most of the fuse in the pcn board
issue the Motor dosen't work mean ther's no power because i switch it the motor from another machine
the sensor work indicate red light

 

problem resolved guys if any one have same problem it was the Pdb board